Electronics

Gorilla Airsoft 'Gorilla MFCU' for PolarStar and Redline Engines | Bluetooth

Gorilla Airsoft 'Gorilla MFCU' for PolarStar and Redline Engines   Gorilla mFCU is a control unit designed for any traditional HPA system and can be configured via Bluetooth.Thanks to this, you can adjust the settings in seconds, without having to...

PolarStar - JACK / F2 Bullet Valve Solenoid - TM MP7 Only

MP 7 PolarStar - JACK / F2 Bullet Valve Solenoid (BV309A / 200 PSI)   For TM MP7 Airsoftjunkiez HPA Kit

Gorilla Airsoft FCU Gen 2 with Bluetooth - Inferno Gen 2 Board | 2024 Rev2

Gorilla Airsoft FCU Gen 2 with Bluetooth - Inferno Gen 2 Board  | 2024 Rev2   Gorilla Airsoft FCU with Bluetooth for Inferno Gen 2 Done with endless testing? So are we. The Gorilla FCU is a control unit designed for any HPA system. And...

Gorilla Airsoft FCU with Bluetooth Gen 2 |2024 rev

Gorilla Airsoft FCU with Bluetooth Gen 2 |2024 rev New Revised version with better battery Life. The Gorilla FCU allows you to replace the FCU’s of the most widely used HPA systems on the market, whether they are single solenoids or double...

Airsoftjunkiez Trigger Control Unit (TCU) with Dual Battery input for M249/LMG PolarStar FCU V3.0

Airsoftjunkiez Trigger Control Unit (TCU) with Dual Battery input for M249/LMG PolarStar FCU V3.0 Plugs into MCU port of PolarStar FCU REV 3.0  Built in Mosfet to protect FCU & ports Dual Battery input for powering FCU & Box Mag...

Polarstar Trigger Lead for M60 and PKM

Bullet Valve Lead for 214 and 309 solenoids

Bullet Valve Lead for 214 and 309 solenoids Standard 4.5" power leads used with the bullet valves used with electro-pneumatic systems such as the F2, F1 and JACK.

Polarstar wire harness 7.5" to 18"

Polarstar wire harness 7.5" to 18"The PolarStar wire harness is constructed with 24 AWG wire for superior continuity and features a nylon mesh sheath to protect the wires as they pass through the replica's body. These harnesses are universally compatible...

Airsoftjunkiez Box Mag Trigger wire harness (MCU) for M249/LMG PolarStar FCU V3.0

Airsoftjunkiez Box Mag Trigger Control wire harness for M249 PolarStar FCU V3.0 -- 10000485 Plugs into MCU port of Polarstar FCU REV 3.0  Bare wire to solder to motor terminals inside Box mag "The MCU wire harness is intended for use with...

PolarStar - JACK / F2 Bullet Valve Solenoid (BV309A / 200 PSI) - 10000363

PolarStar - JACK / F2 Bullet Valve Solenoid (BV309A / 200 PSI)

Polarstar Airsoft Universal V3 Trigger Board - (Jack, F1, F2)

Polarstar Airsoft Universal V3 Trigger Board - (Jack, F1, F2) This trigger board is compatible with your PolarStar JACK, F1, and F2 systems! For single solenoid systems such as the Jack or F1, place your solenoid connector into the poppet port.  The...

Polarstar V2 Universal Trigger Board (F2, Jack, F1) --

Polarstar V2 Universal Trigger Board (F2,Jack,F1) This switchboard is designed to replace the original trolley type trigger switch in a traditional TM spec V2 gearbox. It is not compatible with variants of the V2 gearbox which use a...