HPA FCU LiPo 7.4v 300mAh 30C Battery

Perfect LIPO Battery pack to power HPA Firing Control Unit (FCU) 2 cell 7.4V 300mAh 20C Li-Polymer battery pack. Pre-installed JST PH 3-Pin, JST XH 3-Pin, and red JST 2-pin connectors. Maximum charge rate 12 Amps for burst. This is the perfect...

Polarstar Jack M249 (A&K or Classic Army) Players Kit

Polarstar Jack M249 (A&K or Classic Army) Players Kit   Included is everything you'll need to install a Jack into your M249. The engine, harness, plug board, hollow grip screw, and FCU are included.      

PolarStar 33G CO2 Cartidge for UGS and CGS

PolarStar 33G CO2 Cartidge for UGS and CGS The 33g CO2 cartridges are for use with the 33g CO2 insert for PolarStar's UGS and CGS systems. Based on an F2 running at 1.5J w/ .28g through a 6.05x380mm barrel, a 33g will average approximately 500 shots at...

Polarstar High Pressure Regulator Spring (MR, CGS, UGS)

Polarstar High Pressure Regulator Spring (MR, CGS, UGS)     The Compact Regulator High Pressure spring is compatible with both first and second generation Micro Regs as well as the UGS and CGS systems. Changing out the spring can be done in...

Polarstar F2 Nozzle (Cyma MP5 & AK)

Polarstar F2 Nozzle #2

PolarStar F2 MK43 M60 -- with MCU

PolarStar F2 MK43 M60 -- includes MCU & Box Mag   PolarStar F2 with Motor Control Unit FCU Adjustable 310-440 FPS 7.4v 200 mah Lipo battery  

Airsoftjunkiez Trigger Control wire harness for M249 PolarStar FCU V3.0

Airsoftjunkiez Trigger Control wire harness for M249 PolarStar FCU V3.0 -- 10000485 Plugs into MCU port of Polarstar FCU REV 3.0  Bare wire to solder to motor terminals inside Box mag    

PolarStar MRS Regulator w/36" braided color line option

PolarStar MRS Regulator w/36" braided color line option Introducing the new Modular Regulator System (MRS) designed and manufactured by PolarStar Airsoft. This ultra compact regulator stands just 3 inches tall and threads directly onto the HPA tank. In...

UGS Stock Rail for 2" tanks

UGS Stock Rail for 2" tanks The UGS stock rail provides indexing and length adjustment that the rail on a buffer tube would normally provide. By swapping between the 2.00" rail and the Milspec rail on your UGS you are able to reconfigure the stock...

UGS Stock Rail - Milspec for CO2 Inserts

UGS Stock Rail - Milspec CO2 Insert The UGS stock rail provides indexing and length adjustment that the rail on a buffer tube would normally provide. By swapping between the 2.00" rail and the Milspec rail on your UGS you are able to reconfigure...

PolarStar UGS CO2 Insert, 33g

PolarStar UGS CO2 Insert, 33g Polarstar CO2 inserts are manufactured for both the UGS and CGS stocks and have models for both the 12g and 33g CO2 cartridges in either variant. However, the inserts have more uses than just being paired with one of these...

PolarStar UGS CO2 Insert, 12g

PolarStar UGS CO2 Insert, 12g Polarstar CO2 inserts are manufactured for both the UGS and CGS stocks and have models for both the 12g and 33g CO2 cartridges in either variant. However, the inserts have more uses than just being paired with one of these...